The Occurrence of Recent-Subrecent Seabed Acoustic Anomalies and Its Relationship with Structural Uplift around the Waipoga Trough, West Papua-Indonesia

Authors

  • Dida Kusnida National Research and Innovation Agency, Jln. Sangkuriang, Dago, Bandung, 40135,, Indonesia
  • Ali Albab Marine Geological Institute, Jln. Dr. Djundjunan 236, Bandung, 40174,, Indonesia
  • Tumpal B. Nainggolan National Research and Innovation Agency, Jln. Sangkuriang, Dago, Bandung, 40135, Indonesia
  • Yulinar Firdaus Marine Geological Institute, Jln. Dr. Djundjunan 236, Bandung, 40174,, Indonesia

DOI:

https://doi.org/10.17014/ijog.10.1.109-117

Abstract

Marine Geological Institute acquired high-resolution seismic and acoustic data during a survey in the Waipoga Trough-West Papua in 2018. The profiles show acoustically blanking, turbid, and cloudy occur along the trough floor over 3,000 km2. Many accoustic chimneys are breaking through the seabed of recent and subrecent sediment layers. It is suggested due to the local expulsion of methane gas. The pockmarks occur as transparent and turbid acoustic characteristics. They locally have relief down to 2-10 m below the seafloor with horizontal dimensions up to 25 -100 m in width. Methane formation due to the rapid deposition of organic-rich sediment down the uplifted area around the trough, associated with thrust fold tectonics is suggested as a triggering agent for the acoustic anomaly formation.


Downloads

Published

20-02-2023

How to Cite

Kusnida, D., Albab, A., Nainggolan, T. B., & Firdaus, Y. (2023). The Occurrence of Recent-Subrecent Seabed Acoustic Anomalies and Its Relationship with Structural Uplift around the Waipoga Trough, West Papua-Indonesia. Indonesian Journal on Geoscience, 10(1), 109–117. https://doi.org/10.17014/ijog.10.1.109-117

Issue

Section

Articles

Citation Check

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.